Lots of Scratches

For most hardwood floors, some scratching is inevitable over time. You can opt to refinish or repair scratched areas, although in some cases, a little scratching adds character to the wood, especially with distressed finishes. However, if you notice the floors take scratches more easily than they used to, or if you notice deep scratches that go through the finish and expose fresh wood below, it’s a sign that your polyurethane coating is wearing thin or is compromised, and you’ll want to refinish and re-coat the floor to prevent further damage.

Fading

Direct sunlight on the wood eventually causes some fading of the color. When the fading becomes especially pronounced or noticeable, it may become distracting. You may want to refinish and re-stain the floors at that point to restore them to a consistent color.

Discoloration/Greying

Grey floors are in fashion right now, but if you notice floorboards greying and that wasn’t the original color, it’s generally a preliminary sign of water/moisture damage, not age. Graying floors mean the polyurethane coating is thinning or wearing off, and it’s time to refinish the floors. If you let it go too long, the grey will eventually turn darker until it’s black. At that point, replacement becomes your only option.

Cupping/Warping/Splintering

A little bit of cupping and crowning is normal with wood floors as the boards respond to changes in humidity and temperature. However, if you notice significant cupping or warping of the panels or cupping that doesn’t resolve, it’s a sign of water damage. Another sign to watch for is splintering along the panel edges. All of these are indicators that the protectant coating is worn out. If the damage is severe, you may need replacement, but for mild cases, refinishing the floor will do the trick.

You Want an Updated Look

Sometimes, we just get tired of the same old look of our floors year after year. Perhaps you have added new furniture that doesn’t match the flooring, or maybe you just want a change. As long as the floor is in good condition, refinishing them gives you the opportunity to create a whole new look for your space without having to replace the floors.

Not sure whether your floors need to be refinished? We can help with a free in-home evaluation and estimate. If you live in Tulsa, Glenpool, Broken Arrow, Coweta or other parts of Green Country, give Renaissance a call today at 918-298-4477.

The post 5 Key Signs It’s Time to Refinish Your Hardwood Floors appeared first on Renaissance Hardwood Floors.

Don’t panic. First things first—this is most likely NOT a result of poor quality wood, nor of bad installation. Believe it or not, this is a common occurrence for wood flooring—a result of the wood interacting with moisture and humidity. You’re seeing either cupping or crowning of the wood. In most cases, it’s treatable, and in mild cases, it even resolves on its own. That said, let’s discuss what crowning and cupping are, and more importantly, what you can do about them.

What Is Cupping?

Cupping is a situation where the edges of your wood planks curve up higher than their center, in a concave matter. Cupping occurs when the moisture content underneath your floors (your subfloor) is considerably higher than the moisture above. Wood is porous, and when it absorbs moisture, it expands. When moisture is higher underneath your floors, the wood planks compress against each other and have nowhere to go but upward—hence, the cupping of the edges.

Some common reasons for cupping:

• Sudden changes in humidity in the air, often due to weather (springtime in Oklahoma is notorious for this).
• Sudden changes in temperature, causing the subfloor to be warmer/colder than the outside air.
• Accumulating moisture in the subfloor. This can be caused by anything from plumbing leaks to moisture seeping under the home during a particularly rainy spell.

What is Crowning?

Crowning is effectively the opposite of cupping: The centers of your wood planks bulge higher than their edges. This typically happens when the moisture content of the surface of the floor is much higher than the moisture underneath the floors—either due to extended periods of high humidity or perhaps by a liquid spill left for a long period of time. Crowning can also happen as an unintended result of sanding down cupped planks before allowing them to dry fully.

Dealing with Cupping and Crowning Floors

Mild cupping and crowning are actually natural functions of your hardwood floors as they respond to moisture, and once the relative humidity equalizes in the wood, your floors should return to normal over time, even with Oklahoma’s extreme weather changes. However, in instances where cupping/crowning happen due to leaks or excessive water, the damage may be more sustained. Crowning floors can often be evened out by sanding them, and dehumidifiers may be able to restore cupping planks. In extreme cases (usually due to prolonged negligence or natural disasters like flooding), the flooring may need to be replaced.

Preventing or Reducing Cupping and Crowning

To keep cupping or crowning at a minimum, your best defense is humidity and temperature control. Take steps to keep the relative humidity in your home between 35-45 percent by alternating between humidifiers and dehumidifiers as needed. Keep your home at a consistent temperature in the summer months using your air conditioner.

If cupping or crowning floors become particularly noticeable, or if you have concerns that the issue is beyond the normal function of your hardwood floors, call the experts sooner rather than later to minimize damage. For more information or an inspection of your floors, call Renaissance Hardwood Flooring at 918-298-4477.

The post Cupping and Crowning: What They Are and What You Can Do About Them appeared first on Renaissance Hardwood Floors.